AES G 0128 – Declaration type and requested procedure must match regulation Annex B columns.

Created by Omer Farooq, Modified on Wed, 18 Feb at 11:10 AM by Omer Farooq

System: G

Error Code: G 0128 (G-0128)

Explanation

Declaration type and requested procedure must match regulation Annex B columns. Error if invalid combination.

When it happens (Reason)

The definitions in regard to Union procedure code, declaration type and additional declaration type, per Columns (table heading in Annex B to Delegated Regulation (EU) 2015/2446)) are the following: Column B1: The D.I. ‘Declaration type’ shall be equal to ‘EX’ and the D.I. ‘Requested procedure’ shall be in set of values {10, 11, 23, 31}. Column B2: The D.I. ‘Declaration type’ shall be equal to ‘EX’ and the D.I. ‘Requested procedure’ shall be in set of values {21, 22}. Column B3: The D.I. ‘Declaration type’ shall be equal to ‘CO’ and the D.I. ‘Requested procedure’ shall be in set of values {76, 77}. Column B4: The D.I. ‘Declaration type’ shall be equal to ‘CO’ and the D.I. ‘Requested procedure’ shall be equal to ‘10’. Column C1: The D.I. ‘Additional declaration type’ shall be in set of values {B, C, E, F}.

Quick Fix

Review Annex B for column definitions. Set declaration type and requested procedure to match (e.g., 'EX' with 10-31 for B1). For additional type, use B,C,E,F for C1. Resubmit.

Step-by-step resolution

Review Annex B for column definitions. Set declaration type and requested procedure to match (e.g., 'EX' with 10-31 for B1). For additional type, use B,C,E,F for C1. Resubmit.

Keywords

G 0128, G-0128, G0128